• Christie CP2000-X Projector

Specifications Christie CP2000-X

Brightness (measured at screen center)
  • Light output meets 14fL SMPTE recommendation (film 16fL open gate) for screens up to 23m (up to 75ft width)
Contrast Ratio
  • >2000:1 full field on/off
Brightness Uniformity
  • >90 when displaying full white screen
TI DLP Cinima™ Technology
  • CineBlack™ Contrast Management
  • CineCanvas™ Image Management
  • CineLink™ Security Management
  • CinePalette™ Color Management
Digital Micromirror Device™
  • 2K 3-chip DMD DLP Cinema™
  • 2048 x 1080 pixels
Input Line Voltage
  • 208V or 400V nominal three-phase at ballast (selectable)
  • 200 to 240V single-phase at projection head (less than 10 amps)
Colour Processing (bit depth)
  • 45 bit (3 x 15-bit resolution)
Number of Colours
  • 35 trillion
Digital Video Input
  • Two (2) SMPTE 292M; dual or single
Graphics Input
  • 2 x DVI interface
Power Supply
  • Separate 7kW low-ripple switch mode lamp ballast
Zoom Lenses
  • 1.8-2.2:1
  • 2.2-3.0:1
  • 1.25-1.45:1
  • 1.45-1.8:1
  • 1.8-2.4:1
  • 2.2-3.0:1
  • 3.0-4.3:1
  • 5.5-8.5:1
Anamorphic Lenses (optional)
  • 1.26:1 (for scope format)
Reflector
  • F/1.5 High Performance Compound Glass Reflector
Safety Interlocks
  • (4) Lamp Access Door, rear intake vent, extraction port, cable-connected lamp ballast
Douser
  • Electronic douser
3-Axis (X, Y + Z) Automatic Lamp Alignment
  • Christie LampLOC™
Ambient Temperature
  • 0-35°C (32-95°F)
Dimesions
  • Projection head (approx., LxWxH) 48" x 26" x 20"
  • Ballast (LxWxH) 21" x 18" x 21"
Weight
  • Projection head weight (approx): 260 lbs
  • Ballast weight (approx): 110 lbs

Christie CP2000-X User Guide Manual

Alternative - Click hereto the PDF!

Alternative - Click hereto the PDF!

Write a review

Note: HTML is not translated!
    Bad           Good

Christie CP2000-X Projector